This is RFM (Ryefield Models) #5030, in 1/35th scale.
It is painted with MIG paints; Sand Yellow #0030 is the primary color, then Zashchitniy Zeleno (Russian green) and Shadow Rust added as the camo.
This is the first time I pre-painted the wheels and tires before assembly. Turned out quite nicely.
This kit is nor for the faint-of-heart. It was a booger to build. I had many issues, and am not sure if it is the kit, certainly some of it is the kit, or me, probably a little bit too. My first issue came in Step 4, assembling the length-link tracks. Following the instructions, combining parts C-1 and C-3, the length was too long. I had to alter on the C-1 links by cutting it in half.
In this picture, you can see the shortened track, and the putty necessary to hid the fit issue.
In Step A-9, you are supposed to use PE to make the fuel tank straps mounted on the rear. I could not get them to correctly bend and mount on the rear panel so I rummaged thru my spare parts and found acceptable parts to use as the tank mounts. Once I got the fuel tanks mounted to the rear plate, I discovered that the hull was warped where this assemble would join the hull. Had to do some pushing and shoving to get it super glued in place.
The sub-assembly in Step B-7 has lots of fiddle-bit parts. Mine kept breaking off the gun, I had to super glue it in place several times. Looking back the the instructions, I am certain this aiming mechanism is incorrectly glued in place.
Now for the interior. Wait--there is NO interior!! As you can see from the first picture, I made a rudimentary fire wall, front axle and driver and gunner seats.
You can barely see the seats with the hull on!
Then I painted and washed the interior, very heavily. I added Mini-Art ammo cases and shells, 2 AK-47s, various packs and a fire extinguisher.
And finally with the hull on, I added Mini Art green wine bottles to add some color to the interior.
4 comments:
Might have been a "booger" to build, but the finished product looks pretty good. Esepcially like the camo paint job.
Thanks Mike!!
I agree that it was a highly detailed kit (Less the interior). Very fiddly. I replaced the photo etch grab handles with wire. I all used the mangled fuel tank holders as damage, since these were really beat up.
Nice job Don! She looks good!
Post a Comment