HASAGAWA NUTCRACKER 1/35

 

Finally done. I actually finished the M.A.K. series Nutcracker last year, but never mounted it. The kit actually came with two 1/35 scale Mech suits. They are "Gustav" (left) and "Melusine" (right). These things are models in their own right and I am glad that I took the time to complete them.

The construction was easy enough, just different than building armor. Only one of them had  cockpit figure, but the modeler is supplied with two different heads for the "pilot"...for each suit. So, I have three spare heads that can be used for other projects. I painted them with a base coat of Tamiya Dark Yellow, then I masked them with putty and applied Tamiya JGSDF Green and then Tamiya NATO Brown. Once that was done, I gave them a gloss coat, paint chipping and then a pjn wash. After that I applied some Uschi Polishing Powder in selected areas, and topped them off with some Vallejo Pigments. I think they came out ok.

Once my little buddies were completed, I added them to the base with the Nutcracker. The nutcracker was a decent kit, and I had no complaints. Everything fit the way it was supposed to and there were minimal seam to putty over.

I painted the Nutcracker with Tamiya Dark Yellow, Tamiya Red Brown, and Tamiya Olive Green.  I then applied the German Ambush Camo dot pattern. 

i gave her the standard treatment (Gloss, Pin Wash, and Dull Coat heretofore known as the GPD treatment). The I applied a little bit of chipping and some pigments.

Since this is a Hover Tank, I had to mount it so that it appears to be hovering...like a Hover Tank. Once again, I used grout for the ground work with some Woodland Scenics Grass and Turf. I have been wanting the build this kit for while and I am glad it is finally competed.

British Heavy Tank Mk V Male.

 A full year in the making. The moment that you have all been waiting for... well many of you... OK, a few of you have been waiting for. This is the MENG Mk. V Male with completely detailed full interior. 

It was just too cool to close up, so I had to be creative.  I set it up as if it was a Museum exhibit with the sections cut away. I even included the display boards, runway ropes and simulated steel frame supports for the sections of the tank. I even used the spare track links for a display stand.

This was really fun to work on... OK, it was a tedious pain in the....tank.  Most of the linkages and tiny detail parts were tweezered. It was very difficult to hold onto anything without breaking something off. 

The coolest part was engine. I purposely left the covers off.  Can you imagine, they wanted you to close this up after all the work involved? Keep in mind that this is out of the box, despite it being left open.

I also added some interior back lighting, like they would do in a museum. I was also tempted to do overhead spot lights, but that was a bit much. 

This will compliment the similar arrangement I did on the German A7V. That didn't come with a detailed engine.

Vince B. 4-26-21

E-75 Pathmaker

 Another of the 1/72 scale Modelcollect Fist of War series, which of course I needed to enhance. I have a lot of scraps and leftovers from these kits, enough to collage.  I had a leftover King Tigerish turret which was perfect for this.  The kit came with a 120mm AA gun. 

The barrel is scratch built using styrene and brass rod. I used Evergreen sheets with tile pattern for the add on armor. There are some unseen hydraulic cables added to the leg mechanisms. 

The stowage is is a combination of Black Dog and Priser components.

The camouflage coloring was based on what I had planned for a fall forest scene 1945. I used Modelmaster and Humbrol enamels with the use of theraputty masks. 

The trees and groundwork were made from garden debris and chopped hemp rope with some bought clump foliage and grass scatter. 

Vince B. 4-13-21

Somewhere in Saigon

 Since I had sold all of my Vietnam dioramas, I needed a new one for the display case. As I was formulating the layout with the soldiers working on the detailed engine in the front, Master Box released a new figure set. "Somewhere in Saigon"  which gave me the opportunity to expand the setting for the diorama. Then the dilemma... what to call it. I had two names narrowed down and as Don suggested, why not use both.

 

The build started with the old Tamiya M113 ACAV kit. This provided the basic details and interior I needed.  The engine compartment was sparse and I wanted the hood open. I studied what seemed to be a chaotic stream of pics, where there weren't two engines alike. I selected the details which I could fabricate by adding hoses and wiring, This was enough to allow opening of the compartment. I used two figures from the kit and some hand tools from an Italeri kit.

Then, there was the interior. I needed to add such details as the grab straps on the ceiling, radio, ammo cans and other stowage. This was a combo of misc resin and plastic items from my collection. I also assembled several of the paper carton prints. The drivers compartment was lacking in cable conduits and wiring. 

Doing this helped develop the rest of the story of trading goods for services. Food, cigarettes and cash for.... well, you get the picture. 

Now for the details on the roof of the vehicle. Needed a lot of stowage, misc. gear and weapons. I added wire antennae, straps etc along with making ammo belts for the 30 cal guns.

 

Overall, this was a fun build. The wall segment was a plaster piece from an old Verlinden building. Not sure where I got the resin side walk brick. The street was just plaster over a styrofoam sheet. The couch was a 1/24 scale scrap car back seat covered with tissue. 

Vince B.  4-11-21

M-48 A-3 Patton

 This is Dragon's 1/35th scale M-48 A-3 Patton.  It is modeled after one from the US Army's 69th Armored Division, C Company, at the Battle of Khe Sanh in 1968.  The decals are from Star Decals.  Stowage is a mix of Legend stuff from Patton sets #1181 and #1306.  The Patton is painted with Vallejo paints from the 6 bottle set entitled US Army Olive Drab.  I only used 4 of the 5 shades of olive drab, up close, you can really see the difference in shading!  The usual washes and weathering was done, I did use "Pan Pastels" for the final shading.  I have used these before and I really like them and recommend them to our readers.

Now on to the next Patton, probably an M-60!!.  Enjoy!!

KEEPING UP WITH WERNER.....

I had to follow-up with my almost complete rendition of Tamiya's 1/35 Bradley Fighting Vehicle.

So far the build is straight from the box, except for some modification I did to the side skirts and some other decals from my left-overs.  I primed it with Tamiya rattle can grey primer and then used different shades of Ammo by MIG acrylics.

I have yet to finish weathering (right side) and I still plan on putting on some stowage.  I also have some other bits to add along with antennas.

It was my first Bradley too, and I appreciated the typical simple joys of a Tamiya experience.

Sneak Peek - not quite as far along, but here is my next Tamiya closing in on completion

BRADLEY M2A2

 

This is Tamiya's M2A2 Bradley in 1/35 scale.

She is painted with Vallejo Acrylics Dark Sand. The stowage is painted with Tamiya Olive Green and Olive Drab. She was given a pin wash and was weathered with a combination of Vallejo Pigments and some enamel streaking.

The figures came with the kit and aren't bad, these days I am looking for how well facial features are defined, specifically the eyes as it makes them easier to paint. And these figures were well molded for stock pieces.

I also took the liberty of drilling out one of the launcher slots and inserting a projectile to simulate a TOW preparing to be launched. It is difficult to see, but up close in person it is visible. The groundwork is sand colored grout and worked well for this setting. This is my first Bradley build and I am pleased with the way it came out.

Henschel Typ 33 D1

 Yes, It,s a cargo Truck. Not a single gun to be seen. Why am I doing a TRUCK???

Well, I wanted to try something different. Also I don't normally do REVELL of Germany kits. Very fiddly bits like a ZVEZDA kit. Even with my screw ups, this didn't turn out too bad. I'm not going to tell you the stupid things I did, along with continually breaking off the Fiddleys.

I also featured the Value Gear resin accessories, which are probably the best part of the build. These resin bulk cargo blocks paint up and detail out really well.

I have to say that I did learn a lot about how that canvas cab cover works. The side windows fold up with the convertible top, so they are NOT part of the door frame, as I tried to make them originally. 

I did have some fun detailing out the windows which do have to be put on from the inside of the cab. I managed some wiper effects with the help of a circle scribe and masking tape. 

I might actually try another truck someday.

Vince B.  3-8-21

Another Magach 6B Gal Batash

 This is my Magach 6B Gal Batash, built for our IDF build competition. It is the Academy kit with some additions. 

The stowage is from the kit, Black Dog, & Dioart. The coaxial machine gun is built from some kit and some Legend parts with EZ Line for the control cables. Non-slip surfaces are made from embossing powder. (Last photo shows this on turret before painting.) Cable supports on basket are made from Evergreen L-channel. The antenna is a length of fiber optic line. The tactical insignia panels are made from aluminum foil. Figure is from the kit.

Kit is painted mostly with acrylics. The main color is ModelAir Hemp. Tracks were painted with ModelMaster gun metal lacquer. Black pin wash added. Weathering is AK Middle Eastern Dust pigment held on with alcohol.

 

 

 

M-9 Armored Combat Earthmover (ACE)

 I recently completed the Takom M-9 ACE for the HAC Engineering Vehicle contest.  The M-9 is built out of the box, base coat paint is Model Master Sand, #4720, and of  course, heavily weathered.  The kit allows you to pick 3 different blade/suspension posses; driving mode, blade down digging and suspension lowered, blade up with suspension raised up.  I chose the last option with the blade up and suspension raised up.

It is modeled after an M-9 ACE serving in the 20th Engineers in Iraq.

In these 3 photos above you will see the rubble, ground cover, dirt and other debris I added to the blade and inside the bay.

And here are two more photos while under construction.  Now go back in the blog's archives and look for Vince's version with blade down and digging!  What a fun kit to build.  And am probably going to add a base and more rubble.

Enjoy!